AMBROSIA SILK PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

AMBROSIA SILK PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing FilamentAmbrosia Filament's line of SILK PLA is part of our Low Calorie line of filament, no additives just butter smooth printing. This filament is extra shiny, and shows off colors very vividly. This filament is especially good at showing color contrasts in co extrusion and other multi color. Feed your Printer the Filament of the Gods. Derived from 100% Virgin Grade A Non Toxic pellets. Manufactured to a tighter than standard tolerance (+ 0. 03mm) you'll

Ambrosia Filament's line of SILK PLA is part of our Low Calorie line of filament, no additives just butter smooth printing. This filament is extra shiny, and shows off colors very vividly. This filament is especially good at showing color contrasts in co-extrusion and other multi-color. 

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

PLA is most hobbyist makers material of choice for 3D printing. A bio-degradable plastic derived from renewable resources (such as corn... I know we say our filament is low calorie, but don't eat it - your printer is the only machine that should injest our filament!) it is one of the easiest materials to print with, with a relatively low melting point and is able to be printed without a heated bed. Printing with PLA is typically odorless, or when it smells gives of a 'sweet' aroma, and emits less harmful fumes than some other 3D printing materials, making it a safer option for enclosed spaces without proper ventilation. 

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 130G

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

Check out our other lines of Ambrosia Filament!

Ambrosia Filament's Recommended Print Settings for our PLA filament:

Technical Specifications for our PLA Filament:

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.