Pay in installments of $6.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Standard Resin V2Main Features Models DisplayResin Parameters Resin Color Anycubic Standard Resin V2 Main Features High Strength & High Toughness Based on the classic Anycubic standard resin, the Anycubic standard resin V2 further enhances toughness, boasting an increase of 93% in elongation at break. The finished models are resistant to impact, durable, and less prone to breaking, while still maintaining a certain degree of flexibility. Lower Odor By upgrading the
Anycubic Standard Resin V2
Main Features
High Strength & High Toughness
Based on the classic Anycubic standard resin, the Anycubic standard resin V2 further enhances toughness, boasting an increase of 93% in elongation at break. The finished models are resistant to impact, durable, and less prone to breaking, while still maintaining a certain degree of flexibility.
Lower-Odor
By upgrading the resin formula, the resin odor has been significantly reduced, creating a more comfortable printing environment for users.
High Precision with Minimal Shrinkage
With an even lower shrinkage rate, the chance of distortion is decreased. Achieve top-notch precision and display sharp, vivid details in your prints.
High Compatibility
Compatible with 365-405nm wide band, suitable for most LCD and DLP light-curing 3D printers on the market, and easier to clean, helping novice users get started quickly.
Anycubic Standard Resin V2
Models Display
Wide Application
As an entry-level resin, Anycubic Standard Resin V2 with a high success printing rate at the same time, is suitable for printing high intensity models that require high strength and toughness, such as industrial parts, assemblies, tools, architectural models, prototype proofing, figure design, etc.
Anycubic Standard Resin V2
Resin Parameters
UV Wavelength
365-405nm
Elongation at Break
25-30%
Density
1.05-1.25g/cm³
Molding Shrinkage
4.3-5.6%
Viscosity
250-350cPimPa·s
Flexural Strength
40-50MPa
Hardness
80-83D
Felxural Modulus
1500-2100MPa
Tensile Strength
35-45MPg
Heat Deflection Temp
60-65℃
Bottom Exposure Time
20-40s
Resin Wash
Alcohol
Normal Exposure Time
1.5-3s
Shelf Life
1.5 Year
Anycubic Standard Resin V2
Resin Color
Anycubic Standard Resin V2
Notes
Before use:
- Shake the liquid resin before use;
- Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
- Unscrew the cap and add it to the resin tank according to the equipment requirements;
- Select the correct print parameters and settings for printing.
- After printing, please use the matching tools for post-processing, including blades, diagonal pliers, tweezers, containers, and gloves; clean them with water.
- Remove the printed model from the molding platform with a blade.
- Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then take it out and drained; Anycubic Wash and Cure machine s are suggested to ensure a better effect.
- Proper processing, such as removing support, polishing, coloring, etc.
Anycubic Standard Resin V2
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35℃, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60℃).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please takeout the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
- The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is no more than 1 hour (self-regulation);
- The exposure time in the sun (summer) is around 1 hour;
- Proximity or long-term exposure under strong light sources such as high power high-pressure mercury lamps is prohibited;
- It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
- To avoid yellowing caused by long-term curing of High Clear Resin, please reduce the exposure time by half compared with other resin colors.
- Black resin may appear partially transparent in thin walls (<0.5mm), so the greater thickness can achieve better color effects.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 16 reviews
Sort
Product Reviews
★★★★★ 5
Beautiful angel statue
Size: 7*5*13 in, Size: 7*5*13 in
Got this angel garden statue about three weeks ago to put in our backyard and we really like how it looks. The resin construction is detailed and well-made, depicting an angel with spread wings and three-dimensional flowers adorning the hair, collar, and skirt hem. The craftsmanship is impressive for the price, gives off a soft romantic vibe. The solar panel on the back charges during the day - they claim 8 hours for a full charge which seems about right with good sun exposure. As night falls, the string lights embedded in the flowers turn on automatically which is convenient. However, the lights are not very bright at all. They emit a warm glow but it’s pretty dim, more of a subtle accent rather than actual illumination. You can see the flowers lit up but it’s not going to light up your garden or anything. The soft tranquil glow they advertise is accurate - it’s definitely tranquil because it’s so faint. Despite the dim lighting, we still like the overall appearance and ambiance it creates. The angel design is elegant and the natural elements blend nicely with our garden decor. The statue is weather-resistant and has held up fine through rain and sun exposure so far. The automatic on/off feature works reliably with the solar sensor. The energy efficiency is good since it’s completely solar powered with no wiring needed. Setup was easy, just stake it in the ground where it gets sunlight. The symbolism of angels and flowers is nice for memorial or decorative purposes. The size is decent, not huge but noticeable in the garden. The resin material feels durable. Would make a thoughtful gift for someone who appreciates garden decorations. Price seems reasonable for what you get. Would I recommend it? Yeah if you want a decorative angel statue with subtle accent lighting, just don’t expect bright illumination at night.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
★★★★★ 4
Very nice resin sculpture but LED distracting
Size: 7*5*13 in, Size: 7*5*13 in
I was pleasantly surprised at the quality of this resin Angel statue. It looks better, in person, than shown in pictures. The features of the face, and wings, are very nice.
What I found distracting/detracting from my overall favorable opinion is that the LED lights are embedded in the flowers at the waist and base. This is distracting at night as they do not illuminate the face or wings but leaves that in darkness with just bright lights around the waist and base. If the lights were higher up, or more directional, perhaps embedded in the wings to light up the face, torso and wings it would be so much better.
To use the solar lights at night, care should be taken to ensure the back is directed toward light and that nothing surrounds the statue to block proper charging, The solar panel in back is very small and will not provide much recharging unless in direct light. If placed on the ground, with plants around it, the panel will be shaded which is not efficient.
I am very pleased with the actual sculpture and would rate it higher but, I personally find the addition of the solar lights is superfluous, with no real additional value to an otherwise very nice sculpture. As a result, I intend to turn off the solar light and illuminate this with a garden light/spot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2026
★★★★★ 5
Great Value, Lasts All Night
Size: 7*5*13 in
Impressed with the quality and performance. The angel is sturdy and weather-resistant. The solar panel charges efficiently even on partly cloudy days, and the LED light stays on from dusk until morning. It provides a lovely, gentle light that’s both decorative and functional. Excellent purchase for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2026
★★★★★ 5
Beautiful angel statue
Size: 7*5*13 in, Size: 7*5*13 in
Got this angel garden statue about three weeks ago to put in our backyard and we really like how it looks. The resin construction is detailed and well-made, depicting an angel with spread wings and three-dimensional flowers adorning the hair, collar, and skirt hem. The craftsmanship is impressive for the price, gives off a soft romantic vibe. The solar panel on the back charges during the day - they claim 8 hours for a full charge which seems about right with good sun exposure. As night falls, the string lights embedded in the flowers turn on automatically which is convenient. However, the lights are not very bright at all. They emit a warm glow but it’s pretty dim, more of a subtle accent rather than actual illumination. You can see the flowers lit up but it’s not going to light up your garden or anything. The soft tranquil glow they advertise is accurate - it’s definitely tranquil because it’s so faint. Despite the dim lighting, we still like the overall appearance and ambiance it creates. The angel design is elegant and the natural elements blend nicely with our garden decor. The statue is weather-resistant and has held up fine through rain and sun exposure so far. The automatic on/off feature works reliably with the solar sensor. The energy efficiency is good since it’s completely solar powered with no wiring needed. Setup was easy, just stake it in the ground where it gets sunlight. The symbolism of angels and flowers is nice for memorial or decorative purposes. The size is decent, not huge but noticeable in the garden. The resin material feels durable. Would make a thoughtful gift for someone who appreciates garden decorations. Price seems reasonable for what you get. Would I recommend it? Yeah if you want a decorative angel statue with subtle accent lighting, just don’t expect bright illumination at night.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
★★★★★ 4
Very nice resin sculpture but LED distracting
Size: 7*5*13 in, Size: 7*5*13 in
I was pleasantly surprised at the quality of this resin Angel statue. It looks better, in person, than shown in pictures. The features of the face, and wings, are very nice.
What I found distracting/detracting from my overall favorable opinion is that the LED lights are embedded in the flowers at the waist and base. This is distracting at night as they do not illuminate the face or wings but leaves that in darkness with just bright lights around the waist and base. If the lights were higher up, or more directional, perhaps embedded in the wings to light up the face, torso and wings it would be so much better.
To use the solar lights at night, care should be taken to ensure the back is directed toward light and that nothing surrounds the statue to block proper charging, The solar panel in back is very small and will not provide much recharging unless in direct light. If placed on the ground, with plants around it, the panel will be shaded which is not efficient.
I am very pleased with the actual sculpture and would rate it higher but, I personally find the addition of the solar lights is superfluous, with no real additional value to an otherwise very nice sculpture. As a result, I intend to turn off the solar light and illuminate this with a garden light/spot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2026
recommand products
Cockatoo Crest Curve Treadmill Racer |Max User Weight 180Kg | 3 Running Modes | Magnetic Resistance | 8 Degree Incline
72999.50
Cockatoo Crest CFT 2800 Commercial Treadmill | 8 HP Peak AC Motor | 0.8-20 Km/h Speed
64999.50
Cockatoo Stylish Sports Goggles | Swimming Goggles for Men & Women | With UV Shield & Anti-Fog
109.50
It Is My Heart's Love Forever Heart Necklace For Wife
49.95
CFT 2600 Commercial Treadmill | 10 HP Peak AC Motor | 1-20 Km/h Speed
76499.50